Pressure Independent Valves

PIC-V, MVP®, Pinnacle and PIM Valves

Sizes: 1/2″ – 10″

Griswold Controls’ PIC-V®, MVP®, Pinnacle and PIM valves are Pressure Independent Control Valves. Pressure independent (PI) valves can help reduce energy costs and increase occupant comfort. PI control valves are designed to replace the conventional 2 way control valve and balancing valve pair, installed at heating and cooling coils in buildings. To obtain the most efficient and optimal results in a system, only the necessary amount, no more and no less, of chilled or heated water must be delivered to the heating and cooling coils at all times. Traditional control valves allow for over flow and under flow to coils which means excess water is pumped to compensate for their inaccuracy. The actuators in traditional valves also have to cycle more often to compensate for pressure changes in the system that impact the flow. By precisely controlling the flow of water to each coil, the valve enables energy savings, increases available plant capacity, minimizes capital expenses necessary to acquire additional capacity, and simplifies system design and control.

Every year billions of dollars are wasted due to the weaknesses in HVAC heating and cooling systems. If heating and cooling systems do not consistently operate at their designed temperature differential, energy waste occurs and money is wasted. This unnecessary expense can be eliminated by using Griswold Controls’ pressure independent valves.

Recommended Applications:

  • Where balancing at reduced loads is needed, such as office buildings, schools or hotels
  • When temperature variance cannot be risked, such as hospitals, laboratories or prisons
  • Where longer actuator life is required
  • Where the primary variable flow system needs to be optimized

PIC-V®, Space Saver PIC-V®

Sizes: 1/2″ – 3″



Specification Sheets & Product Information

Form# Description
F-5509 (PDF) 1/2″ – 2″ SpaceSaver PIC-V® Specification Sheet
F-5508 (PDF) 1/2″ – 3″ PIC-V® Specification Sheet
F-4478 (PDF) 1/2″ – 2″ PIC-V® Written Specification
F-4479 (PDF) 1/2″ – 1″ Typical Coil Piping Installation Schematic
F-5357 (PDF) PIC-V® Variable Cv Without Balancing
F-5363 (PDF) Pressure Independent Control Valves PIC-V® & MVP®
F-5487 (PDF) Choosing the Right Valve for the Job: PIC-V® or Automizer®

MVP® Pressure Independent Control Valves

Sizes: 2-1/2″ – 10″

Specification Sheets & Product Information

Form# Description
F-4271 (PDF) 2-1/2″ – 10″ MVP® Specification Sheet
F-4499 (PDF) MVP™ Typical Installation Schematic 1/2″ – 10″
F-5363 (PDF) Pressure Independent Control Valves PIC-V® & MVP®
F-4332 (PDF) Installation & Operations Instructions For MVP Valve


Sizes: 1/2″ – 2″

Form# Description
F-5556 (PDF) Pinnacle Color Brochure
F-5557 (PDF) Pinnacle Specification Sheet
Pinnacle (PDF) Pinnacle Installation Operation and Maintenance Manual

PIM Pressure Independent Control Valves

Sizes: 3″-6″

 PIM-4 w flange2

Specification Sheets & Product Information

Form# Description
F-5532 (PDF) PIM Pressure Independent Module
F-5533 (PDF) PIM-V Pressure Independent Valve
F-5534 (PDF) PIM-BV Pressure Independent Module with a Manual Ball Valve
F-5535 (PDF) PIM-V-MS Pressure Independent Valve with Metering Station
F-5510-Ad (PDF) PIM Ad
F-5510 (PDF) PIM 4 page color brochure
F-5568 (PDF) PIM-A brochure

Installation, Operation and Maintenance

Form# Description
F-709 (PDF) Installation and Operations Instructions